首 页
韦德国际官网1946介绍
新闻中心
政策法规
技术服务
招商合作
公共服务
孵化器
招贤纳士
联系我们
    > 技术服务
公共EDA平台
设计服务平台
MPW流片服务
芯片测试分析
芯片封装
IP交易中心
    > 服务平台
  您当前的位置:首页 > 技术服务 > IP交易中心   
分 类 开源IP/免费下载  |   推荐IP核  |   Physical Library  |   Analog & Mixed Signal  |   Arithmetic & Mathematic  |   Controllers  |   Peripheral Cores  |   Interfaces  |   Bus  |   Digital Signal Processing  |   Processors & Microcontrollers  |   Memory Element  |   Security / Error Corr. Det. / Modulation  |   Multimedia / Video / Image / Audio  |   Wireline Communications  |   Wireless Communications  |   Platform Level IP  |   Software IP  |   FPGA IP  |   Other  |   Verification IP  |  
Verisilicon:S13V33_USB20PHY_03
类型:硬IP
简短描述:480M H/F/L speed mode compatible, USB 2.0 host/device dual role phy
详细描述:

The USB 2.0 dual role PHY is a Hi-Speed USB peripheral transceiver IP that implements the Intel?UTMI standard. It provides a High/Full-Speed USB analog front-end with a build-in 8-bit/16-bit parallel interface, therefore, it is easy to interface with USB2.0 Device System. It can work as host phy or device phy, depending on different setting of DPPULLDOWN and DMPULLDOWN.


工艺:0.13um
代工厂:SMIC
应用:
特色:

SMIC13 general 1P6M process  
Compliant with the USB Spec Rev2.0  
Compliant with the UTMI Spec Rev1.05  
Supports 480Mbit/s 揌igh Speed?and 12Mbit/s 揊ull Speed? 
Supports 60MHz/8-bit unidirectional interface and 30MHz/16-bit bidirectional interface  
12MHz external crystal, internal oscillator and PLL are used for generating high-speed internal clock and CLKOUT output  
Internal terminations include 1.5Kohm pull-up resistor switching on DP/DM in the FS mode and the HS chirp mode  
Clock and data recovery from serial stream on the USB bus  
Supports detection of USB reset, suspend, resume and remote-wake-up features  
Supports the test modes defined in the USB2.0 Specification.  
NRZI and Bit Stuff encoding and decoding  
Supports low/full speed serial mode  
Works as host phy or device phy by setting DPPULLDOWN and DMPULLDOWN

    Verisilicon:S13V33_USB20PHY_01     Verisilicon:SMIC25_USB11_01
分享到: